Asbestos is a building material which was utilized before for roofing in residential and commercial buildings. In Australia, individuals dwelling in the old buildings, which have been assembled using any substance containing asbestos, are now working on removing the asbestos.
Asbestos substances that are present on the roof of any building pose a very high risk to both residents and the outside environment round the area. Asbestos combined with cement may chip off the roof and fall off the ceiling. On surfaces in the house so developing a health hazard, the chips may then drop.
Asbestos roof removal in Sydney, just like every other type of asbestos removal, needs to be done under rules and regulations in accordance with The Queensland Code of Practice (2011). These regulations require that any kind of removal, whether big or small, ought to be undertaken by a contractor that is licensed. It is because a licensed contractor will conform to all rules and regulations on managing the material.
Here Are The Steps In Removing Roof Asbestos To Follow:
Step 1: Pre- Analysing The Material And Assessing The Roof
At this stage, the roof is evaluated to identify the kind of substance present. On one hand, friable asbestos breaks down into dust particles which float in the air. When these particles are inhaled, they accumulate in the respiratory system thus causing mesothelioma. On the other hand, non-friable asbestos is bonded and this makes it less dangerous to the environment. Actual danger appears when particles are inhaled or consumed.
Because lots of particles settle there, the gutter ought to be managed with utmost care. Some ceilings, like the popcorn ceiling, are probably to contain asbestos. It’s dangerous for anyone without a license to get rid of asbestos from your roof. Hiring a category A permit holder is preferred for this type of job, because such a contractor can manage more than 10 square meters of an area with either friable or non-friable asbestos.
Work Safe British Columbia requires that samples in the site are collected and taken to the laboratory for additional inspection. A report is prepared giving details of the tasks which will occur throughout the removal. The report is subsequently given to the home owner who’ll hire a licensed contractor to do the asbestos removal task.
Measure 2: Asbestos Removal
The hired contractor, together with his workers, begins the procedure for removing asbestos from the roof of the building and reports to the site.
According to the Safe Work Australia Code of Practice, anyone handling asbestos should have their protective gear. Overall, gloves and respiratory equipment must be worn through the entire removal process. The site should also be cordoned off to keep folks from the location.
The roof is kept wet to bind the loose particles together. It’s then cut out, one section after another.
Step 3:Disposal The debris accumulated from the site must be placed in sealed bags and labelled clearly. The waste is then disposed off in areas meant for asbestos debris disposal.
Every one of these steps should be performed by a professional to prevent damage of the home.